SoundBrick
®
550N
11/2007
10
INSTALLATION
Step 1 – Set the option switches
Set the option select “DIP” switches to match your requirements for night message
size, bandwidth, passwords, night answer rings, night answer on/off, and internal
speaker on/off.
“off”
“on”
Figure 3 - Option Select Switches
This example is for illustrative purposes only.
Your actual switch settings will vary.
A switch is “on” when it is pointing
TOWARDS
the switch numbers. The switch is
“off” when it is pointed
AWAY FROM
the switch numbers. In the picture shown
above, switches 1 and 2 are “off” and switches 3 through 10 are “on.”
Switch #
Option
Possible Values
1
Night message size
On = 60 seconds
Off = 30 seconds
2 Bandwidth
On = 11.5KHz
Off = 6.5KHz
3-4
Password select
See table 4
5-6
Night answer rings
5 off, 6 off = 1 ring
5 on, 6 off = 2 rings
5 off, 6 on = 4 rings
5 on, 6 on = 8 rings
7-8 Not
used
9 Night
answer
On = Night answer on
Off = Night answer off
10 Internal
speaker
On = Speaker on
Off = Speaker off
Table 4 - Option Select (DIP) Switches
IMPORTANT NOTE: Changes to the night message size and bandwidth
settings do not take effect until power is recycled and messages
reloaded. Changes to password select and night answer rings do not
take effect until power is recycled.
