background image

Installation:

There are two ways to use the UAT.  Refer to the setup instructions that apply 
to the way you plan to use UAT.

Apple

®

 Mac System Requirements:

•  PPC G3 or later, or Intel Mac 
•  512MB RAM 
•  Mac OS 9.2 or Mac OS X 10.2 or 

later 

•  Available USB Port 
•  iTunes 4 or higher

PC System Requirements:

•  Intel

®

 Pentium 4 or later 

•  512MB RAM 
•  Microsoft

®

 Windows XP or later 

•  Available USB port 
•  iTunes

 4 or higher, Windows 

Media Player 9 or higher, Music 
Match 9 or higher, RealPlayer 10 
or higher

For Computers: 

Select this option if you want to transmit audio wirelessly from your iTunes or 
other compatible computer based juke box software. 

Plug the USB cord into your UAT – the smaller USB plug will fi t into the port 
on the back of the UAT. The other end will fi t into your computer. However, 
do not insert the UAT into your computer until you have opened Windows

®

Once Windows has opened and is fully operational, please insert the other 
end of the USB cable into any available USB port on your computer. Once 
this step is completed, you should see a small window that states “USB 
device successfully installed”, then immediately after that another window will 
open that states “USB Audio Device Installed”. You will know this has been 
successful if you see the bottom plate of the UAT glowing green. After these 
two windows have opened and closed (with Windows Vista™ this will occur in 
one window), you can bring up your music library application.

Once you have opened your music library, select a playlist and you are ready 
to transmit the music to any Soundcast receiving unit.

 NOTE:

 You must insert 

the UAT before you bring up the music library. Otherwise, it will not transmit 
the music. The music will continue to play through the speakers connected to 
your computer if you insert the UAT after the music library is operating. If your 
Soundcast receiver or speaker has track controls, then those controls will 
allow you to change the music tracks forward and back, and you can pause 
and play the music - all from the remote location where you have placed the 

5

Summary of Contents for UAT













Reviews: