i-ceilings Sound
fi
eld Systems provide a complete
solution designed for use in teaching and training
environments. They utilise the latest speaker and
infrared technology to create sound reinforcement
systems which combine the highest levels of
performance and
fl
exibility with the minimum of visual
intrusion.
Please remember that Sound
fi
eld is a ‘sound
reinforcement’ system, not a public address system;
levels should therefore be set accordingly.
www.soundfield.uk.com
2
Typical Classroom Coverage:
Please note:
These infrared Sound
fi
eld Systems are
designed for use in a typical standard sized classroom
(normally up to 60m²) and are not recommended for
use in large room applications such as school halls,
lecture theatres, sports halls, etc...
(For larger applications, we suggest using RF
wireless microphone systems).
The IR wireless microphones use direct/re
fl
ected light
emissions and, so, large non-re
fl
ective surfaces (light
absorbent surfaces such as black/dark painted walls
or large fabric coverage, etc...) in the classroom which
may reduce coverage must always be considered in
the system’s performance.
Installation of 2 wall sensors in a classroom:
Infrared
remote
sensor
10m in width
whiteboard
Infrared
remote
sensor
10m in
width
Please read this manual carefully before starting the
installation and ensure you have all the equipment
required.
This product should only be installed by a competent installer. The manufacturer accepts no responsibility for any resulting
damage or consequential loss due to incorrect installation.
• It is essential that all equipment mounting trays and safety bonds (safety cable & security clips) are used
and installed correctly.
• The amplifier will get warm during use, so please allow adequate ventilation around the unit.
Should you need to clarify any details with regards to the product or its installation, please contact our technical
support team on 0115 977 0075; we are always happy to provide help and technical advice.
