8
Thank you for choosing a SOUNDLIGHT device.
The SOUNDLIGHT DMX DSI Converter 3004T is an intelligent DMX converter decoding digital data complying with
standard USITT DMX512 and DIN 56930-2 to DSI serial output to drive digital SOUNDLIGHT LUXMATE PCA ballasts
for flourescent tubes. The card can be used with all standard light control systems. Its special advantages include:
-
universal protocol decoding
Recognizes all variants of the protocol as defined by USITT / ESTA / DIN
-
future-proof
The unit is software controlled an can easily be adapted to any change in protocol definition.
-
high linearity
As the unit accepts and outputs data in digital format, excellent linearity chracteristics result.
-
simple supply
The power supply is achieved by its own PSU, power supply is 230V AC.
-
signal loss
In the case of a loss of the drive signal the last setting will remain intact.
-
cost-effective
The SOUNDLIGHT 3008R is a cost-effective solution for many purposes.
APPLICATIONS
The converter 3004T is designed to drive flourescent light tubes with variable intensity. Up to eight SOUNDLIGHT
LUXMATE PCA electronic ballasts (8 separate circuits) may be connected. Each output can drive one ballast. The
unit is well suited for all applications on stage, for TV background lighting, or for architectural lighting purposes. The
dimming range is 100% to 1%, and OFF at DMX input zero..
UNPACKING
Please unpack carefully and check that all items are intact. When leaving our factory, the card has been in good
condition. In case of damage during transport please notify the carrier immediately.
When unpacking, you should identify these items:
*
the interface box
*
this manual
CONNECTORS
The 3004T decoder has RJ45 DMX input and output connectors for quick wiring using CAT5 network media.
CN1, CN2
RJ45 DMX Input/Output (both connectors parallel)
1
DMX -
2
DMX +
3
GND
4
GND
5
fed thru
6
fed thru
7
fed thru
8
fed thru
