2
Thank you for choosing a SOUNDLIGHT device.
The SOUNDLIGHT DMX to 1...10V Converter 3044B-H is an intelligent DMX converter decoding
digital data complying with standard USITT DMX512 and DIN 56930-2 to analog output to drive
analog dimmable ballasts for flourescent tubes. The card can be used with all standard light control
systems. Its special advantages include:
-
universal protocol decoding
Recognizes all variants of the protocol as defined by USITT / ESTA / DIN
-
future-proof
The unit is software controlled an can easily be adapted to any change in protocol definition.
-
high linearity
As the unit accepts and outputs data in digital format, excellent linearity chracteristics result.
-
simple supply
The power supply is achieved by its own PSU, power supply is 230V AC.
-
signal loss - switchable
In the case of a loss of the drive signal the last setting will remain intact.
-
fully isolated data input
Increased safety in case of system failure by optically isolated DMX data input.
-
cost-effective
The SOUNDLIGHT 3004B-H is a cost-effective solution for many purposes.
APPLICATIONS
The converter 3044B-H is designed to drive flourescent light tubes with variable intensity. Up to
twenty-five electronic ballasts (assumed: max 1mA per input) may be connected per output. The unit
is well suited for all applications on stage, for TV background lighting, or for architectural lighting
purposes. The dimming range is 100% to 1%, and OFF at DMX input zero..
UNPACKING
Please unpack carefully and check that all items are intact. When leaving our factory, the card has
been in good condition. In case of damage during transport please notify the carrier immediately.
When unpacking, you should identify these items:
*
the interface card 3004B-H
*
this manual
The optional programming adaptor 3000P must be ordered separately
.
