7
Technical Data
Dimensions:
86mm (W) x 113mm (D) x 68mm (H)
Piower Supply:
230 V AC
DMX IN:
1 Unit Load
DMX OUT:
fed thru
Ballast Out:
1-10V DC Signal (current
sink
, max. 25mA)
Order Code:
3044B-H
Disturbances
If a trouble-free operation cannot be guaranteed, disconnect the decoder interface and secure it
against unwanted operation. This is especially necessary, when
- the unit has visible damages;
- the unit does not operate;
- internal parts are loose;
- connection cables show visible damages.
CE Marking
The unit has been tested in our lab and has been marked to comply with CE
requirements. To ensure compliance, use grounded power leads only and make
sure that properly shielded data lines (CAT5, DMX data cable or Digital Audio cable
to AES/EBU specifications) are used. Any modifications not approved by the
manufacturer may void CE compliance.
Limited Warranty
This instrument ist warranted against defects in metarials and workmanship for a period of 12
month, beginning with the date of purchase. The warranty is limited to repair or exchange of the
hardware product; no further liability is assumed. SOUNDLIGHT is not responsible for damages or
for loss of data, sales or profit which arise from usage or breakdown of the hardware product. In
germany, SOUNDLIGHT will repair or replace established defects in hardware, provided that the
defective part is sent in, freight paid, through the responsible dealer along with warranty card and/or
sales receipt prior to expiration of warranty.
Warranty is void:
- when modifying or trying to repair the unit without authorisation;
- modification of the circuitry;
- damages by interference of other persons;
- operation which is not in arccordance with the manual;
- connection to wrong voltage or current;
- misuse.
Service
There are no parts within the DMX DSI / DALI decoder 3004B-H which require the user's attention.
Should your unit require servicing, please send it to the factory, freight paid.
