DAB270
/ English Instruction Manual
2
Note:
➢
When the batteries are low power,
“Battery low” is shown in the display. Please change the
batteries in time.
➢
When the unit is powered by batteries, in order to play longer time, it is better not set the
volume to max.
➢
If the device is operated with batteries and is in standby mode, the batteries will still be
discharged. To avoid this, we recommend removing the batteries or connecting the device
to the mains.
BASIC OPERATIONS
POWER ON / OFF
Press “
POWER / MODE
” (9) to turn the unit on.
In on mode, press and hold
“
POWER / MODE
” (9) to turn off the unit in standby mode.
In
standby, press and hold again “
POWER / MODE
” (9) to switch the unit off (Only available with
batteries!).
SELECTING MODES
During playing mode, p
ress the “
POWER / MODE
” (9) repeatedly to switch between the modes.
ADJUSTING VOLUME
With
“
VOLUME -
“ (7) or “
“ (8) adjust the volume.
DAB
Extend completely the telescopic antenna.
1. When switched on, choose with
“
POWER / MODE
” (9) the DAB mode.
2. At the first start the unit will automatically start the scan function and search all available
stations.
3. During the scan the display
show “Scanning ………” together with a slide bar that
indicate the progress of the scan and the number of found stations.
4. After the scan has finished, the unit will select the first alphanumerically found station.
5. Select
a found station with “ ” (4) or “ ” (5) and press “
SELECT
” (6) to confirm.
Note:
➢
If there is no DAB+ reception at any time, change the position of the unit or adjust the
antenna. Press “
SCAN
” (1) button to start a new search.
➢
If DAB reception is poor, dropouts may occur or the sound will be muted. Change the
position to improve the reception.
STORE PRESET STATION
1. Select the desired radio station.
2.
Press and hold the “
PRESET
” button until “Preset Store” is shown in the display.
3.
Choose with “ ” (4) or “ ” (5) the desired program station number and press to confirm
“
SELECT
” (6).
4. Repeat steps 1
– 3 to store further radio stations.
You can also store desired radio station directly to preset station buttons
“
1
– 0
” (12). To do this,
select the desired radio station press and hold the corresponding station button pressed until
"Preset # stored" appears on the display.
