SOUNDMASTER KTD 51002, User Manual

31

Radio Function                                                                 

Press the FM button on the remote control or the SOURCE button on the front panel to enter 

FM radio mode. Then press the SEEK+/- button on the remote control or the 

/

buttons on 

the front panel for about 1.5 seconds to start searching forward/backward from the current 

frequency. Press the SEEK+/- or 

/

buttons again to stop searching. Radio frequency will be 

displayed on the display panel. The frequency range of FM is from 87.5MHz to 108MHz.     
 

Fine Tuning 

Press the SEEK+/- button on the remote control or the 

/

buttons on the front panel once 

to fine tune the frequency forward/backward under radio mode. 
 

Semi-memorizing radio stations 

If you like a radio station and want to store it for later listening, press the DVD SETUP/SET 

button on the remote or the SET button on the front panel to memorize it. “SAV X X” will be 

displayed on the display panel, “X X” represents the default station number. 

There are two methods to organize the memorized stations: 

—

Use the 

▲▼

 buttons to adjust the channel number for your preference, and then press 

the SET button again, the station will be memorized with the coded station number. 

—

Press the SET button again, the station will be automatically memorized with the default 

station number in sequence.   

You can store radio stations from 0 to 19, total 20FM radio stations. If no buttons are pressed 

within 3 seconds of pressing the SET button first time, the frequency will appear on the 

display panel again, and the station will not be stored. 
 

Accessing memorized radio stations 

—

First use the number buttons on the remote control to input, then press the OK button 

for confirmation to go to the selected radio station directly; Or without pressing any 

button and wait a moment, it also goes to the selected radio station.     

—

Press the 

▲▼

buttons on the remote control or front panel to select the radio stations 

forward and backward.   

When selecting the stations, the “CH XX” will appear on the display panel, where the “XX” is 

the channel number of the stored radio station. After a few seconds, the “CH XX” disappears 

and the radio frequency will be displayed once again.