NR995 / English Instruction Manual
8
TURNTABLE OPERATION
IMPROTANT
TO AVOID DAMAGING THE CABINET OR THE PHONO LID, NEVER
FORCE THE LID CLOSED. ALWAYS RAISE THE LID TO RELEASE
THE LID SUPPORT BRACKET.
DOOR SUPPORT BRACKET, PULL FORWARD TO RELEASE AND
LOWER DOOR.
To protect the turntable from damage during transportation, a transit
screw is located at the upper right of the turntable platform.
Before playing, please use a screwdriver to turn the transit screw in
clockwise direction (screw going down) completely.
To lock the turntable again for transportation, please turn the screw in
counter clockwise direction to lock the mechanism.
PLAYING RECORDS
This system includes a full-size, 2-speed, belt-drive turntable. You can play 33 & 45 rpm
records.
1.
Press the
“ / MODE”
button at the front panel and set the volume to a low level.
2.
Press the “MODE” button to enter the “PHONO” mode.
3. Make sure that you have removed the stylus cover from the stylus and have released the
tone arm lock that secured the tone arm to the tone arm rest.
4. Set the turntable speed selector to the appropriate speed 33,45 rpm. If you are playing 45
rpm ‘singles’, place the 45 rpm adapter on the centre spindle.
5. Place your record on the centre spindle.
6. Raise the cue lever to lift the tone arm off its rest. Move the tone arm to the edge of the
record. The turntable starts automatically. Use the cue lever to gently lower the tone arm
onto the record.
7. Press
the “VOL-/+” button to the desired level.
8. When the tone arm reaches the end of the record it automatically returns to the tone arm
rest and the record player stops.
9.
To turn the system ‘off’, use the
“ / MODE”
button.
NOTE:
Do not turn or stop the turntable manually. Moving or jarring the turntable
without securing the tone arm clamp could result in damage to the tone arm.
ADJUST THE WEIGHT OF THE STYLUS
When you change a new stylus for the player, you may use
the
‘weight adjust’ at the end of the tone to adjust the suitable
weight of the new stylus.
1.
Rotate the
‘weight knob’ in the clockwise direction, you
may adjust the weight among 0.5g, 1.5g and 2.5g; (Fig 1)
Fig. 1
Fig. 2
2.
Rotate the ‘weight knob’ in the counter-clockwise, you
may adjust the weight among 0g, 1.0g and 2.0g; (Fig 2)
