RCD1185
/ English Instruction Manual
3
1. Press the
PROG
button, the LCD
display will show ‘ 01 ‘ and “PROG” flash continuously.
2. Press the or buttons to select the desired track.
3. Press the
PROG
button again to store this track in memory, the LCD
will show ‘ 02 ‘ and
flash continuously.
4. Repeat steps from 2 to 3 to store more tracks in memory. You can store up to 20 tracks in
the memory.
5. Press the button to play the disc in the programmed order.
6. To stop playing, press the
STOP
button.
7. To cancel the programming list, press the
STOP
button and open the CD door or set the
FUNCTION
switch to OFF position.
Repeat Mode
Repeat 1: Press the
REPEAT
button once, the REP indicator will flash on the LCD display. This
single track will be repeated.
Play complete folder (only with MP3-CD!): Press the
REPEAT
button again. The display will
show REP ALBUM. The complete folder will be repeated.
Repeat All: Press the
REPEAT
button again, the REP ALL indicator will show on LCD display.
The whole disc will be played continuously.
Random play: Press the
REPEAT
button again, the display will show RAND. The tracks of the
CD are played in a random order.
To Cancel Repeat Function: Press the
REPEAT
button until all indicator turned off.
CD resume function
RESUME
– continuing from where you have stopped
1. Set the
FUNCTION
switch to
RESUME
position.
2. To start playing the CD, press the button.
3. Press
STOP
in once whenever you want to stop playback.
4. Press to resume playback.
5. Playback continues from where you have stopped.
To deactivate RESUME, set the
function switch to “CD.MP3”, “FM” or “OFF”.
Note:
Opening the CD door during playback, RESUME function is also activated.
Important Note
Automatic standby switching
To comply with the ERP2 directive, the unit automatically switches to standby after approximately
10 minutes without a signal. To switch the unit on again, press the button on the unit.
If the button is pressed continuously for 5 seconds, the unit switches to standby mode. To
switch the unit on again, press the button on the unit.
