background image

 

6

* ENGLISH * 

IMPORTANT SAFETY INSTRUCTIONS 

WARNING:

 

TO PREVENT FIRE OR SHOCK HAZARD DO NOT USE THIS PLUG WITH AN EXTENSION 
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED 
TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE 
THIS APPLIANCE TO RAIN OR MOISTURE. 

 

 
 
 
 

 

 

This lightning flash with 
arrowhead symbol, within an 
equilateral triangle, is 
intended to alert the user to 
the presence of insulated 
dangerous voltage within the 
products enclosure that may 
be of sufficient magnitude to 
constitute a risk of electric 
shock presents. 

Warning: to reduce the risk of 
electric shock, do not remove 
cover (or back ) no user - 
serviceable part inside.   
Refer servicing to qualified 
service personnel. 

The exclamation point 
within an equilateral 
triangle is intended to alert 
the user to the presence of 
important operating and 
maintenance (servicing) 
instructions in the literature 
accompanying the 
appliance.   

 

1.

 

Read these instructions. 

2.

 

Keep these instructions. 

3.

 

Heed all warnings. 

4.

 

Follow all instructions. 

5.

 

Do not use this apparatus near water. 

6.

 

Clean only with dry cloth. 

7.

 

Do not block any ventilation openings. Install in accordance with the manufactures instructions. 

8.

 

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat. 

9.

 

Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two 
blades with one wider than the other. A grounding type plug has two blades and a third grounding 
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not 
fit into your outlet, consult an electrician for replacement of the obsolete outlet. 

10.

 

Protect the power cord from being walked on or pinched particularly at the plugs, convenience 
receptacles, and at the point where it exits from the apparatus. 

11.

 

Only use attachments/accessories specified by the manufacturer.   

12.

 

Unplug the apparatus during lightening storms or when unused for long periods of time. 

13.

 

Refer all servicing to qualified personnel. Servicing is required when the apparatus has been 
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or 
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not 
operate normally, or has been dropped. 

14.

 

This appliance should not be exposed to dripping or splashing water and no objects filled with 
liquids such as vases should be placed on apparatus. 

 

Dripping warning:

 The products should not be exposed to dripping or splashing and that no objects 

filled with liquids, such as vases, shall be placed on the product. 

Ventilation warning:

 The normal ventilation of the product should not be impeded for intended use. 

Summary of Contents for SCD-6300MP3











Reviews: