7
RADIO
Antenna
The appliance is equipped with a telescopic antenna (1)
for reception of the FM band. For best reception, pull the
telescopic antenna all out and turn it (ill. ).
The built-in ferrite antenna can be used for receiving the AM
band. For best reception, move the appliance around to find
the optimum position (ill. ).
Switching the radio on and off
Set the function switch (20) to
RADIO
to switch on the radio.
The power indicator (14) lights up red.
Set the function switch (20) to
OFF
to switch the radio off.
The power indicator (14) goes off.
Selecting a band
Set the desired band with the band switch (19):
Switch position
Band
FM ST.
FM Stereo
(Frequency modulation with stereo reception)
Note: FM ST.
LED (4) lights when the stereo signal of a station is
received.
FM
FM
(Frequency modulation)
AM
AM
(Amplitude modulation)
Selecting a station
Set the desired station with
TUNING
(24).
Read the selected frequency position on the frequency scale (3).
CD OPERATION
This appliance supports the Audio CD format. Other formats are not supported by the appliance.
For CD-R discs the quality may be influenced by the quality of the burned disc.
