SCD5950 / English Instruction Manual
8
To cancel programmed memory:
During CD stop mode, press
“STOP”
button once; or open CD Door during CD stop mode. The
“PROG” indicator will disappear from LCD display.
USB OPERATION
IMPORTANT NOTE:
This unit supports most of the common MP3 interface but not 100% because there are
too many different formats keep on changing in the market.
1. Press
“
FUNCTION
”
button to
“USB” position. until LCD display shows “
USB
” indicator.
Remarks
: When there has no MP3 Player or Flash drive connecting
to USB port, LCD display will
show “
”.
2. Insert USB plug of an Auxiliary unit (e.g.: Portable MP3 Player or
Flash Drive) into USB port.
3.
The units is reading the USB and starting the playback of the first track. During playback the
track time is shown on the display.
4. Operate all CD control buttons same as above- mentioned section playing
“MP3 DISC”; they
have same function and operation method.
TIME
Set Time
STANDBY MODE press and hold
“
INFO/MENU
”
button to Time setting.
Set 12/24 hour press
or
button to select 12/24 hour ,press
“
INFO/MENU
”
button to confirm.
Set the time (Hour) press
or
button to select hour press
“
INFO/MENU
”
button to confirm.
Set the time (Minute) press
or
button to select Minute press
“
INFO/MENU
”
button to
confirm.
ALARM TIMER
Set Alarm Timer
Standby mode press and hold
“
TIMER/SLEEP
”
button to the Timer menu, until LCD display
shows timer indicator.
Then you will go to the timer setup.
Set the time: Press
or
button to select hour. Press
“
TIMER/SLEEP
”
button to confirm.
Set the minute by
or
button. Press
“
TIMER/SLEEP
”
button to confirm.
Set the sound source: press
or
button to select Tuner/CD/USB,
Press
“
TIMER/SLEEP
”
button to confirm.
Set the alarm volume:
or
button to select, Press
“
TIMER/SLEEP
”
button to confirm.
Enable / disable the Timer
Standby mode press
“
TIMER/SLEEP
”
button to select TUNER/CD/USB/OFF timer on/off setting.
SLEEP
Sleep options
– Sleep off | 15 | 30 | 45 | 60 | 90 |
In the unit working condition, Press
“
TIMER/SLEEP
”
button to setting sleep time. LCD display
w
ill show “S 15”. Repeat above procedure to sleep time setting.
