SCD5950 / English Instruction Manual
3
RADIO OPERATION
Press the
“FUNCTION”
BUTTON
to “FM” position.
Press repeatedly the
or
button to adjust the frequency to your desired radio station.
Press and hold the
or
to automatically tune to the next available FM station.
Adjust sound level by rotating
“VOLUME” control knob.
To off the unit, press and hold
“
FUNCTION
” button to standby.Time be shown on LCD display.
FM Stereo indicator
When tuned to a FM stereo broadcast, FM stereo “
” indicator will be shown on LCD
display.
In weak signal areas where FM Stereo signal may not be strong enough and can cause
excessive background noise. In this case press the CD PLAY Button
to “FM” (mono) position.
Tips for best reception
For best reception, fully extend FM antenna to receive FM stations.
AUTOMATIC STATION MEMORY
Press and hold the
“CD STOP” button to activate the automatically memory storage function, it
will scan up all the frequency and store the found stations to the preset memories.
MANUAL STORING OF STATIONS
1.
During FM mode, press
or
button to your desired radio station.
2.
Press and hold
“
PRESET/ALBUM
”
button.
3.
The “PROG” indicator and number of Program to be memorized starts from the first
program “P-01” will light up and blink continuously.
4.
Press
or
button to select the required your preset number.
5.
Press
“
PRESET/ALBU
M”
button to store this station in memory.
6.
Repeat above procedure until all desired station have been programmed.
Remark:
A total of 20 stations can be stored in memory. Already saved stations will be
overwritten.
RECALL OF STORED STATIONS
1.
To recall a preset station, first press the
“
PRESET/ALBUM
”
button once
2.
Press
or
button to your desired radio stored stations.
3.
When the display shows your desired preset number, press the
“
PRESET/ALBUM
”
button
to confirm.
