background image

During Mix mode, 

display shows 

TO SkIP TO THE BEGINNING OF A TRACk

• 

Press either one of the                       skip buttons according to the desired skip direction.

• 

Play/back resumes from the selected track.

• 

When the            button is pressed once during play, the previous track starts again.

• 

When the            button is pressed once during play, the next track plays.

SEARCHING FOR A PASSAGE WITHIN A TRACk

• 

Keep the           or            button pressed during playback, 

 

and release the button as soon as you recognise the desired 

 

passage. Then normal CD playback will resume from this point.

TO STOP PLAYBACk

Press the STOP    button and the display shows the total 

tracks of the disc.

TO INTERRUPT PLAYBACk 

Press the Play/Pause            button and the symbol "       " will 

���sh. Press the button ����n to resume pl�yb�ck.

CD display

MP3 display

WMA display

USB display

CD display

MP3 display

WMA display

USB display

6.  

Press the PLAY/PAUSE         button. 

 

Track number "01" ," CD "& the symbol "      " will 

 

be shown during normal compact disc playback. 

 

Track number "001"," CD ", the symbol "       " &  

 

"MP3"will be shown during MP3 playback. 

 

Track number "001"," CD ", the symbol "       " &  

 

"WMA" will be shown during WMA playback. 

 

Track number "001"," CD ", the symbol "       " &  

 

"USB" will be shown during USB playback. 

Press PLAY MODE button.

CD plays with a single track repeat, all tracks repeat or randomly.

 

REPEAT , REPEAT FOLDER , REPEAT ALL AND MIX PLAYBACk

CD display

FOR NORMAL COMPACT DISC PLAYBACk 

Mode sequence REPEAT FLASHED >> REPEAT >> MIX 

>> CLEAR. 

During Repeat 1 mode, 

display shows                      

During Repeat 2 mode, 

display shows 

GB 4

CD display

Summary of Contents for SCD6450








Reviews: