background image

 

UR190 / English Instruction Manual

 

12

 

Factory Reset 

This setting clears all user-defined settings and replaces them with the original default settings.  
1.  Press 

“SELECT“ (12) to confirm the selection “Factory Reset”. 

 

2.  Rotate 

“SELECT“ (12) to select “Yes” and then press “SELECT“ (12) to confirm factory reset. 

Note:

 All stations and setting will be lost. 

Software Version 

This option displays the current software version. 

 

 

CHARGING EXTERNAL DEVICE 

Connect an external device (e.g. smartphone, mp3 player) via a USB cable (not provided) to the USB jack on the 
back of the radio for charging. The radio cannot access the contents in the connected external device. 
 
 

Care and maintenance 

 

Clean the radio with a soft damp cloth and let all parts dry completely after cleaning. 

 

Do not use any aggressive cleaners, brushes with nylon bristles, sharp or metallic cleaning utensils, knives, 
hard scrapers and the like. They could damage the surfaces of the radio. 

 

Do not immerse the radio in water and do not let water getting into the housing of the radio. 
 

Storage 

 

Unplug the power adapter and clean the radio before storage. 

 

Always store the radio in a dry and clean place. 

 

SPECIFICATIONS 

 
Tuner Range:   

 

 

FM:  87.50 

– 108.00 MHz 

 

 

 

 

 

DAB: 174.928 - 239.200 MHz 

Number of preset radio stations:  

10 (FM), 10 (DAB) 

AC power adaptor:   

 

 

Input: AC 100-240 V, 50/60Hz 

 

 

 

  

 

Output: DC 5 V 1.5A 

 

 

 

IMPORTER 

Wörlein GmbH 

Tel.: 

+49 9103 71 67 0 

Gewerbestrasse 12 

Fax.: 

+49 9103 71 67 12 

D 90556 Cadolzburg 

Email: 

service@woerlein.com

 

Germany 

Web: 

www.woerlein.com 

 
 
Technische Änderungen und Druckfehler vorbehalten 
Copyright by Woerlein GmbH, 90556 Cadolzburg, 

www.woerlein.com

 

Vervielfältigung nur mit ausdrücklicher Genehmigung der Woerlein GmbH 

Summary of Contents for UR180















Reviews: