SOUNDMASTER UR180 Instruction Manual Download

Page: 3 / 14

UR190 / English Instruction Manual

LOCATIONS OF CONTROLS

1. ON/OFF:

Selects between “On” mode and “Standby” mode (showing clock and date). Cancels

sleep function and a sounding alarm.

2. SOURCE:

Selects between DAB and FM audio sources.

3. MENU:

Shows menus of the current mode.

4. ALARM:

Enters alarm wizard or cancels the alarm (when it sounds), and cycles through alarm

on/off settings in standby mode.

5. SLEEP/SNOOZE: When the radio is playing, selects duration before the radio automatically switches

itself to standby mode. When the alarm sounds, activates the snooze function.

6. INFO:

Cycles through information screens

7. BACK:

Returns to the previous screen.

8. PRESET:

Selects a preset station.

9. SCAN:

In DAB mode, searches all available stations. In FM mode, searches the next available

station.

10. VOLUME:

Rotate the knob to control the volume.

11. Speakers

12. SELECT:

In DAB mode, rotate to select a DAB station. In FM mode, rotate to tune FM

frequency. In menus, rotate to cycle through the options. Press the knob to confirm a

selection.

13. Display

14. Rating label

15. Antenna

16. Headphone jack

17. USB jack

For external device charging

18. DC IN jack:

Connects the power adapter.

Summary of Contents for UR180















Search results

Summary of Contents for UR180

Reviews:

Related manuals for UR180

Brands by name

Popular brands

SOUNDMASTER UR180, Instruction Manual

Search results

Summary of Contents for UR180

Reviews:

Related manuals for UR180

Brands by name

Popular brands