hZϮϭϲϬͬŶŐůŝƐŚŝŶƐƚƌƵĐƚŝŽŶŵĂŶƵĂů
E'ϲ
RDS search
: Press RDS search button(21)to select the program type you want to listen, then press the /- button to start
RDS searching and the unit will automatically search a suitable station, which is currently broadcasting with program type
identification (PTY) signal. If there was no any broadcasting station match your selection, display will show NO MATCH and then
stay back in previous frequency.
Remark
: no “ PS “ nor “ PTY “ appears if no signal is sent.
Program are classified as follows:
NEWS, AFFAIRS (current affairs), INFO (information), SPORT, EDUCATE (education), DRAMA, CULTURE, SCIENCE,
VARIED, POP M (pop music), ROCK M (rock music), EASY M, LIGHT M (light classical),
CLASSICS (serious classical), OTHER M (other music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION,
PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M, OLDIES, FOLK M, DOCUMENT.
Notes
Program service station name (PS)
This is a name consisting of less than 8 alphanumeric characters, which is displayed in order to inform listeners about the
program service being broadcast by the radio station. Example: BBC 1
Programmed type identification (PTY)
PTY allows selection by one of the program types rather than by a station.
Radio text (text)
Information such as the cast list of a play or the title of a song is shown on the display.
FM-Stereo reception
z
Press the “ St/Mono ” button (8) repeatedly, the FM programs are receiving in mono and stereo mode repeatedly. In
particular when stereo signals are weak, it is preferable to receive the program in Mono.
z
If stereo signal is being received, the stereo indicator “
” will appear on LCD display (13) to show FM Stereo program
is now receiving.
Hints for best reception:
-
-
FM : the receiver has a build-in FM wire antenna (24) hanging at the rear cabinet, this wire should be totally unraveled and
extended for the best reception.
Playing Compact Disc
z
Getting start
1. Press Function button (16) to select “ CD ” mode.
2. Push the CD tray open (6) to open the CD tray.
3. Place a CD with the printed side facing up and then close the CD tray.
4. Focus search will performing and the LCD display (13) will show the total number of tracks & total playing time. Then, the
unit will start to automatically.
5. Press Volume knob (14) to the desired volume level.
z
Play / Pause mode
1. To interrupt, press the “ Play/Pause
” button (7) once, and the playing time will be freeze on the LCD display (13). Press
again to resume normal playback.
z
Stop mode
1. If “ Stop
” button (8) is pressed during play or pause mode, system will go to stop mode.
z
Skip mode (skip up
/ skip down
)
1. During play or pause mode, if “ skip up
” button (9) is pressed. It will go to next track and display the track no. and then
remain the play or pause mode.
2. During play or pause mode, if “ skip down
” button (9) is pressed. It will go to the previous track, original track no. is
display and remain the play or pause mode.
z
For MP3 Disc
1. After focus search is performing, the total number of track and album will be shown on the LCD display (13). The unit will
start to plat directly.
2. Press “ Folder/ Pre-up
/down ” button(10) to select the folder number.
3. Press “ Skip Up
or Skip Down
” button (9) to select the track number.
