ENGLISH
ENG 7
Playing mode
• Switch the device into playback mode and insert an audio CD as as previously described.
• In the display (7), the total number of tracks on the CD will be shown for 2 seconds. The display will change to
indicate the time. Press the
DISPLAY
button (5) to display the total number of tracks again for 2 seconds.
• If the CD is being played, you can use the
DISPLAY
button to show the current played track number (approx.
2 seconds).
•
Playback/pause:
Press the button (10) to start and pause playback. If playback has been paused, the track
number will blink in the display (approx. 2 seconds).
•
Stopping playback:
Press the button (13) to stop playback. The total number of tracks on the CD will be
shown in the display (approx. 2 seconds).
•
Next or previous track:
Use the
/MINUTE
(12) and
/HOUR
(11) buttons to skip a track forward/ back. When
the button
/MINUTE
(12) is pressed once, the current track will be played from the beginning. When the button
is pressed twice, then the previous track will be played. When the
/HOUR
button (11) is pressed, the next track
will be played.
•
Fast forwarding and rewinding:
By holding down the
/MINUTE
(12) and
/HOUR
(11) buttons, you can fast
forward or rewind the current track. Once the desired place has been found, let go of the button to continue
playback.
Repeat function
• You can set this function while a track is being played back or when the device is in stop mode.
• Press the
PLAY MODE
button (8) once to continuously repeat the current track. The LED indicator
REPEAT
(F) will blink in the display.
• Press the
PLAY MODE
button twice to continuously repeat the entire CD. The LED indicator
REPEAT
will
come on.
• Press the
PLAY MODE
button twice to switch off this function.
Random playback
• Press the
PLAY MODE
button (8) three times to play all tracks in random order. The LED indicator
RANDOM
(B) will come on.
• Press the
PLAY MODE
button again to switch off this function.
Programming a playback list
• You can program the CD player to play a sequence of up to 20 tracks.
• Switch the device on with the
ON/OFF
button (17) and then switch the device into CD playback mode.
• Press the
PROGRAM
button (9) once to switch to programming mode. The number of the storage space,
P.01, will be shown briefly on the display. Then, the track numbers .00 and the LED indicator
PROGRAM
(G)
will blink in the display (7).
• Using the the
/MINUTE
(12) and
/HOUR
(11) buttons, select a track from the CD. Save your selection with the
PROGRAM
button. The second storage space (P.02), will be opened and can be set as previously described.
• Continue to program further tracks as described above.
• Press the button (10) to play the programme. The LED indicator
PROGRAM
(G) will come on.
• After all programmed tracks have finished playback, the CD player will stop automatically.
• Press the button (13) to stop playing the programme. The playback list will remain in the device’s memory. You
can then play the same playback list again by pressing the
PROGRAM
button (9) and then the button (10).
