background image

1.800.338.7337 / www.soundoffsignal.com

BluePrintSYNC  0220

1

SYNC

®

 

NOTICE: 

Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.

Improper use or installation may void warranty coverage.

To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at 

www.soundoffsignal.com/tech-services/returns/

.

If you have questions regarding this product, contact 

Technical Services

, Monday - Friday, 8 a.m. to 5 p.m. ET at 

1.800.338.7337

 (press #4).

  Questions or comments that do not require immediate attention may be emailed to 

techservices@soundoffsignal.com.

ENHANCING SAFETY THROUGH INNOVATION

•HIGH CURRENT interconnects must be properly terminated.  Poor crimp quality can cause heat build-up and 
fire.  Follow crimp connector manufacturer instructions.
•DO NOT install this product or route any wires in the Air Bag Deployment Zone. Refer to vehicle Owner’s 
Manual for deployment zones.
•Do NOT use system to disconnect headlights, brake lights or other safety equipment.
•Unit may become hot to touch during normal operation.
•Failure to properly install connectors, fuses or wiring may cause vehicle failure or fire.
•Installation must only be performed by trained technician.  Installer must determine vehicle wiring 
configuration and proper integration of system.
•Use proper wire gauge.  All power wires connecting to positive (+) or negative (-) battery terminal or local 
chassis ground (-) must be sized to supply at least 125% of max. current and properly fused at power source.
•Install protective grommets when routing wire through firewall or metal. 

WARNING

INTRODUCTION:

The bluePRINT SYNC

®

 module synchronizes displayed flash 

patterns between vehicles that are commonly equipped with 

bluePRINT SYNC. Any time two or more vehicles are utilizing 

the same pattern, they will be synchronized. 

Configuring the system to utilize the synchronization functions 

requires our bluePRINT3 app. Also, the following hardware 

must have the listed minimum version of firmware installed. 

 

 

Central Controller: 3.08

bluePRINT SYNC

®

CONTENTS

QTY

COMPONENT

1

SYNC MODULE

1

GPS ANTENNA

1

CAT5e 3’ CABLE

1

CAT5e 7 BASE-T PIGTAIL SPLITTER

1

PRODUCT WARNING CARD

1

INSTALLATION INSTRUCTION SHEET

Reviews: