+12V Power
Connect the +12V terminal of the amplifier to the + terminal of the battery using the same
diameteras the ground cable, making sure you install in-line fuse holder, approximately 300 or
400 mm. From the + terminal of battery, making sure that there is no fuse in the battery holder.
GROUND
Disconnect the battery and connect the GND (ground) terminal to the cars chassis.
Keep this cable as short as possible (not longer than 500 mm. or less).
Making sure that the connection with the chassis is rust free and clear of paint or grime.
REMOTE
Connect the REM terminal of the amplifier to the power antenna terminal in the car ignition switch
using 12 or 16 ga. electrical wire.
-7-
Caution
This amplifier is not supplied with internal fuse in itself.
Make sure you install in-line fuse holder from the +terminal
of battery.
Recommend 200 Ampere fuse.
SP-2500D dbPRO :
SP-3000D dbPRO : Recommend 300 Ampere fuse.
To +12V DC
BATTERY
to REMOTE Turn-on
from HEAD UNIT
HEAD UNIT
POWER
SPEAKER
GND
REM
B+
Caution
This amplifier is not supplied
with internal fuse in itself.
Make sure you install in-line
fuse holder from
the terminal of battery.
[SP-2500D dbPRO & SP-3000D dbPRO]
GROUND
GROUND
Summary of Contents for SP-1200.2
Page 12: ......
