background image

The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even 

under the normal operating conditions, which may be sufficient to constitute the risk of electric shock or 

death.

The symbol is used in the service documentation to indicate that specific component shall be replaced 
only by the component specified in that documentation for safety reasons.

Protective grounding terminal

Alternating current/voltage

Hazardous live terminal

ON:

 Denotes the apparatus is turned on

OFF:

 Denotes the apparatus is turned off.

WARNING:

 Describes precautions that should be observed to prevent the danger of injury or death to the operator.

CAUTION:

 Describes precautions that should be observed to prevent danger of the apparatus.

IMPORTANT SAFETY INSTRUCTIONS

·

Read these instructions.

·

Keep these instructions.

·

Heed all warning.

·

Follow all instructions.

Water & Moisture

·

The apparatus should be protected from moisture and 
rain, can not used near water, for example: near bath-
tub, kitchen sink or a swimming pool, etc.

·

Heat

The apparatus should be located away from the heat 
source such as radiators, stoves or other appliances 
that produce heat.

·

Ventilation

Do not block areas of ventilation opening. Failure to 
do could result in fire. Always install accordance with 
the manufacturer's instructions.

·

Object and Liquid Entry

Objects do not fall into and liquids are not spilled into 
the inside of the apparatus for safety.

·

Power Cord and Plug

Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus. 

Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug 
has two blades and a third grounding prong. The wide 
blade or the third prong is provided for your safety. 
If the provided plug does not fit into your outlet, refer to 
electrician for replacement.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY SYMBOLS

·

Power Supply

The apparatus should be connected to the power supply 

only of the type as marked on the apparatus or described 
in the manual. Failure to do could result in damage to the 
product and possibly the user. 

Unplug this apparatus during lightning storms or when 
unused for long periods of time.

·

Fuse

To prevent the risk of fire and damaging the unit, please 
use only of the recommended fuse type as described in 
the manual. Before replacing the fuse, make sure the unit 
turned off and disconnected from the AC outlet.

·

Electrical Connection

Improper electrical wiring may invalidate the product war-
ranty.

·

Cleaning

Clean only with a dry cloth. Do not use any solvents such 
as benzol or alcohol.

·

Servicing

Do not implement any servicing other than those means 
described in the manual. Refer all servicing to qualified 
service personnel only.

·

Only use accessories/attachments or parts recommended 

by the manufacturer.

·

Warning

Please remember the high sound pressure do not only 
temporarily damage your sense of hearing, but can also 
cause permanent damage. Be careful to select a suitable 
volume.

Summary of Contents for NEOMIX-402UFX













Reviews: