Speed slider affects the amount of time a scene will hold its state. It is also considered
a waiting time.
Shutter is a mechanical device in the lighting fixture that allows you to block the light
path. It is often used to lessen the intensity of the light output and to strobe.
5. OPERATION GUIDE
This unit allows you to program 12 scanners of 16 DMX channels, 30 banks of 8
programmable scenes, 6 chases of 240 programmed scenes using 8 faders and other
function buttons. With the use of two jog wheels, you may easily control the Pan or Tilt
of the scanners. To tailor your special effect lighting, this unit enables you to Assign or
Reverse the DMX channels.
5.1. Display Information
The LCD Display contains a maximum of 2x8 characters. When you turn the unit on the
LCD shows Scene 1, Bank 1 as follows:
Below some examples of display messages:
LCD Display
Message
CHASE 5
Chase 5 is activated
STEP 002
The 2nd step of a chase
DATA 151
DMX value (000-255)
WT:1M36S
The current Wait Time is 1 minute and 36 seconds
TP:5.32S
The time of the last two taps is 5.32 seconds
FT:10.5S
Fade Time is 10.5 seconds
ASS07 08
Assign DMX channels 7 and 8
RES10 13
Reverse DMX Channels 10 and 13
SN 6
Scene 6
BK 03
Bank 03
6. SETUP
6.1. Setting up the system
1. Connect this fixture to electric power via DC adapter.
2. Plug in DMX cable(s) to your intelligent lighting as described in the fixtures respec-
12
ENGLISH
SCENEMAKER 1216 PRO USB User manual
