1. Press the
PROGRAM
button until the LED blinks.
2. Position
SPEED
and
FADE/TIME
sliders all the way down.
3. Select the
SCANNERS
you wish to include in your scene.
4. Compose a look by moving the sliders and wheels.
5. Tap
MIDI/REC
button to prepare save.
6. Choose a
BANK
(
1 - 30
) to change if necessary.
7. Select a
SCENES
button to store.
8. Repeat steps 3 through 7 as necessary. 8 scenes can be recorded in a Program.
9. To exit program mode, hold the
PROGRAM
button.
Notes: De-select
Blackout
if LED is lit. You can select more than one fixture.
You can access channels 9~16 by pressing the Page Select button. This is
necessary for fixtures that use more than 8 channels of control.
There are 8 scenes available in every bank.
All LEDs will flash to confirm. The LCD display will now indicate the Scene
number and Bank number used.
SHORTCUT: Press [
PROGRAM
] [
SCANNERS
]. Adjust [
Faders
& Wheel].
Press [
BANK
] [
SCENE
]. Press [
PROGRAM
] to store.
8.3. Running a Bank
1. Use
BANK UP/DOWN
buttons to change Program banks if necessary.
2. Press the
AUTO/DEL
button repeatedly until the
AUTO
LED turns on.
3. Adjust
PROGRAM
speed via the
SPEED
fader and the loop rate via the
FADE
TIME
fader.
4. Alternatively you can tap the
TAP/DISPLAY
button twice (also called
Tap-
Sync
). Time between two taps sets the time between
SCENES
(up to 10 min-
utes).
NOTE: De-select
Blackout
if LED is lit.
8.4. Check a Bank
1. Press
Auto/Del
to enter manual mode.
2. Use the
BANK UP/DOWN
buttons to select the
PROGRAM
bank to review.
17
ENGLISH
SCENEMAKER 1216 PRO USB User manual
