4. You can adjust the duration time using the
FADE TIME
fader.
11.2. Running in Auto Mode
1. Press the
AUTO/DEL
button until the
AUTO
LED turns on.
NOTE: In the Auto mode, programs will be triggered by controllers fade and
speed time as set on the faders.
2. If a
CHASE
button is not pressed the controller will automatically run a
BANK
program.
3. Change
BANK
programs by using
BANK UP/DOWN
buttons.
4. Alternatively you can press a single
CHASE
button (
1
-
6
) or several
CHASE
but-
tons in sequence and all selected chases will loop in the order selected.
NOTE: Multiple chases selected will loop and run in the order originally se-
lected.
5. You can adjust the time between steps by moving the
SPEED
fader and the dura-
tion of the step by moving the
FADE TIME
fader.
11.3. Run Multiple Chases Cycle
1. Press and hold
AUTO/DEL
button.
IMPORTANT! To avoid conflict between scenes running simultaneously that
control the same fixture attributes consider creating individual color and
gobo chases.
2. While holding down
AUTO/DEL
, in succession press and release each
CHASE
you would like to run cycle.
11.4. Blackout
1.
Blackout
button brings all lighting output to 0 or off.
12. MIDI OPERATION
The controller will only respond to MIDI commands on the MIDI channel which it is set
to full stop.
1. Press and hold the
MIDI/REC
button for about 3 seconds.
2. Select the MIDI control channel (1-16) via the
BANK UP/DOWN
buttons to set.
23
ENGLISH
SCENEMAKER 1216 PRO USB User manual
