background image

M ea sure m axim um po ssib le dim ensio ns

M ultiply wa ll thick nes s by 2

S ubtra ct this from e ach dim en sion to
a rrive at G ro ss In terna l Dim e nsion s

M u ltiply LxW xD to arrive at

G ross In tern al Volu m e

Ded uct Vf (volum e of the spe aker fram e )

from G ros s Inte rnal Volum e

B race s?

N o

Yes

C alcu late b race volum e and dedu ct

from G ross Internal Vo lum e

Ded uct Vf (volum e of the spe aker fram e )

from G ros s Inte rnal Volum e

You a re at N et Inte rnal Volum e

in cubic inch es (in )

3

To c onv ert to L ITERS :
Divide in

by 61 .03

To c onv ert to C UBIC FEET:
Divide in

by 17 28

3

3

ENCLOSURE VOLUME FLOWCHART 

BUILDING THE ENCLOSURE 

 

Determine the dimensions of your enclosure. 

Be certain the box you have designed will fit into the location you have 
chosen.  Sometimes making a cardboard box with the same outside 
dimensions is helpful. 

Use 3/4 inch thick Medium Density Fiberboard (MDF) or High Density 
Particleboard.  It is preferable to cut the wood with a table saw to ensure 
straight, even joints.  If a table saw is not available, a circular saw is 
acceptable. 

Use a “T” square to verify precise right angle gluing. 

Use a high quality wood glue and air nails or wood screws to assemble the 
enclosure.  Elmer’s

 woodworker’s glue and Weldwood

 work well.  To 

guarantee an airtight box, seal each inside joint with silicone sealant. 

For Sealed Enclosures, stuff the chamber with 50-75% filling (approximately 
1.5 pounds per cubic foot) of fiberglass insulation or Dacron

For Vented Enclosures, staple 1 inch thick fiberglass insulation or Dacron to 
all walls of the enclosure except the baffle to which the woofer is mounted. 

Use the supplied gasket to seal the woofer in the enclosure and eight(8) 
wood screws or T-nuts and bolts.  Progressively tighten each of the bolts or 
screws to prevent warping the woofer frame.   

Use slide-on connectors to attach speaker wires.  Do not solder wires to the 
provided terminals as this may cause damage to the factory wire 
connection.  This may also void the speaker’s warranty. 

 

 

Reviews: