17
9. Software
9.1. USB Drivers
To install the USB drivers required for the communication between PC
and equipment follow the instructions:
1. Connect the equipment in the PC using the USB cable.
2. If there is an available Internet connection, Windows will silently
connect to the Windows Update website and install any suitable driver
it finds for the device. If no suitable driver is automatically found then
you need to insert the CD-ROM, supplied with the equipment, in the
PC, run the executable “
usb-install.exe
” and click in “
Install
”.
USB Drivers Installer
Welcome to the USB Setup program. This program will install the USB
drivers required to establish the communication between your computer
and test equipment.
It is strongly recommended that you exit all other programs before running
this Setup program.
Cancel
Install
9.2. ST-Logger software
This software makes communication between the equipment and a
computer with Windows operative system easier. It makes possible to
synchronize the date and time of the equipment internal clock with the
computer date and clock, to transfer the stored data (as .TXT) and to
clear the memory.
