4
Chapter 1 General Information
Thank you for purchasing and using our products. Before using the instrument, first inspect it according to the
“1.5 Unpacking Inspection” section of this chapter in this manual. If there is any discrepancy, please contact our
company as soon as possible to protect your rights. If you still have questions after reading this manual, please
contact your local distributor or call our company's engineers directly for further consultation.
1.1 Feature Overview
The ST1963 is a 6½ digital multimeter with high accuracy, stability and speed. The digital multimeter provides a
maximum measurement speed of 1000 readings/sec. ST1963 has a 0.0035% DC voltage basic accuracy, 0.0100%
basic resistance accuracy and other high performance.
ST1963 has broad measurement ranges:
DC voltage from 0.1μV to 1000V
AC voltage from 0.1μV to 750V, peak value of 1000V
AC/DC voltage from 1μV to 750V (RMS)
DC current from 10nA to 10A
AC current from 10nA to 10A
Resistance measurement from 0.01mΩ to 120MΩ
Frequency from 2Hz to 1MHz
Some additional capabilities of Model ST1963:
Full range of functions: In addition to those listed above, ST1963 functions include period, dB, dBm,
continuity, diode testing, arithmetical operation (mX+b) and percent.
Programming languages and remote control interfaces: ST1963 provides the SCPI programming
language and the remote control interface ports USB Device, RS-232C, LAN, IEEE-488/GPIB (option),
and Handler (option) interface.
Readings and instrument settings: Up to 10,000 readings can be stored in local mode.
Completed calibration: The unit can be calibrated either from the front panel or through the remote
control interface.
1.2 Operating Environment
Power supply: 110V/220V ±10%
Line frequency: 50Hz / 60Hz ±5%
Power consumption: ≤30VA
Operating temperature: 0°C to 40°C
Humidity: ≤ 90%RH
1.3 Dimensions and Weight
Dimensions (W×H×D): 225mm
×
100mm
×
355mm
Net weight: Around 2.5Kg
