-32-
For Machines Mfg. Since 7/09
Model SB1016/SB1036
O P E R A T I O N
Refer to the following figures and descriptions to
learn about the basic controls of this machine.
Main Power Control
A. Master Power Switch:
The rotary switch
shown in
Figure 37
toggles incoming power
ON/OFF
to the lathe. It also prevents the
electrical box door from being opened when
the switch is
ON
. If switched to
OFF
, this
switch is not a safe alternative to completely
disconnecting the machine from power when
wiring, servicing, or making repairs.
B. Quick Change Gearbox Levers:
Controls the
leadscrew and feedrod speed for threading
and feed operations.
C. Headstock Feed Direction Lever:
Controls
the direction that the leadscrew and feed rod
rotate.
D. Gearbox Range Lever:
Shifts the quick
change gearbox from neutral into high or
low.
E. Threading and Feed Chart:
Shows the
configurations of the gearbox levers and
displays the positions of the various gears for
different threading or turning options.
F.
Spindle Speed Range Lever:
Controls the
speed ranges available to the spindle.
G. Micrometer
Stop:
Clamps along the way, and
serves as a stopping point indicator, so when
cutting shoulders the tool tip can be stopped
at exactly the same point every time.
Headstock Controls
B
Figure 38. Headstock controls.
Description of Controls
& Components
C
D
E
F
G
Control Panel
Figure 39. Control panel.
M
L
K
J
I
H
H. Tachometer Display:
Displays the current
spindle speed in RPM.
I. Spindle Speed Dial:
When rotated, the EVS
dial electronically varies the spindle speed
within each of the four available spindle
speed ranges.
J. Power Light:
Illuminates when lathe is
receiving power and the controls are LIVE.
A
Figure 37. Master power switch.
