SERVICE
-38-
For Machines Mfd. Since 9/20
South Bend Tools
Model SB1092 & SB1094
S E R V I C E
Removing/Replacing
Canister Filter
If the canister filter is clogged or dirty and
cleaning or washing it does not improve dust-
collection performance, the canister filter must
be replaced.
Items Needed
Qty
An Assistant ..........................................................1
Safety Glasses (Per Person) ..................................1
Wrench or Socket, 12mm ......................................1
Wrench or Socket, 10mm ......................................1
Shop Vac ................................................................1
Forklift or Jack ......................................................1
SB1105 Canister Filter (SB1092) .........................1
SB1107 Canister Filter (SB1094) .........................1
T27900 Filter Collection Bag (SB1092) ...............1
T25484 Filter Collection Bag (SB1094) ...............1
To remove and replace canister filter:
1.
DISCONNECT MACHINE FROM POWER!
2.
Release bag clamp, then remove filter
collection bag (see Figure 60). Tie bag
closed.
Figure 60. Filter collection bag components.
Canister
Filter
Bag Clamp
Collection
Bag
3.
While supporting canister with forklift or
jack, remove (8) flange bolts securing canister
to housing assembly (see Figure 61).
4.
Vacuum loose dust inside impeller housing
and on machine.
5.
Support canister filter with forklift or jack
and position it under housing assembly.
Rotate filter so that mounting holes align,
then rotate spindle so spindle cap is aligned
with motor shaft.
6.
Attach filter to assembly housing with (8)
flange bolts (see Figure 61).
7.
Attach new filter collection bag around
bottom of canister filter and secure with
clamp.
Figure 61. Flange bolts securing canister to housing.
x8
This machine and its
parts are heavy! Serious
personal injury may occur
if safe moving methods are
not used. To reduce the
risk of a lifting or dropping
injury, ask others for help
and use power equipment.
!
