1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Models:
6" (152)
30"
(762)
Model P16-PF45
Model P20-PF65
60"
(1524)
72"
(1829)
24" Flue Riser
36" Flue Riser
36"
(914)
33-34"
(859)
4-1/2" (114)
37-3/4" (960)
34" (864)
40" (1017)
43-3/4" (1112)
Flue riser for deep depth-option
extends rearward 6" (frypot size
is the same as for standard depth).
1-1/4” Front
Gas Manifold
Model P16-PF45
Model P20-PF65
16"
(406)
20"
(508)
33-3/4"
(858)
9"
9"
(178)
2-3/4 "
(70)
(178)
5-1/2"
(140)
2-3/4"
(70)
3/4” rear gas connection
1” rear gas connection
**MINIMUM 24” FLUE RISER REQUIRED**
(Optional Foot Print Filter System)
P16-PF45
P20-PF65
IntEndEd FOr COMMErCIaL USE OnLY.
nOt FOr HOUSEHOLd USE
.
OPtIOnS and aCCESSOrIES
GAS: Each unit has a 1-1/4” front gas manifold that couples to the
adjacent sectional unit(s), and a 1” NPT male rear gas connection for
P16 models and 3/4” NPT male rear gas connection for P20 models
(See plan view note above). Minimum supply pressure is 7” W.C.
for natural gas and 11” W.C. for propane. All sectional units require
a regulated gas supply; pressure regulator to be ordered separately.
If using a flexible hose gas connection, the I.D. of the hose must not
be smaller than the connector on the unit and must comply with ANSI
Z21.69, providing an adequate means of restraint to prevent undue
strain on the gas connection.
MISCELLanEOUS
UtILItY InFOrMatIOn
- If casters are used with flex hose, a restraining device
should be used to eliminate undue strain on the flex hose.
- Minimum clearance from noncombustible construction is
zero. Minimum clearance from combustible construction
is 10” on sides and 6” on rear.
- Install under vented hood.
- Check local codes for fire and sanitary regulations.
nOtICE:
Southbend has a policy of continuous product research
and improvement. We reserve the right to change
specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding
changes, improvements, additions or replacements for
previously purchased equipment.
Form PSF Rev 8 (June/2012)
Fryer filter system (7.0 A, 120 V, 1 phase)
Stainless steel frypot cover
Extra single basket (full size) for 14” pot
Flue Risers: 24”, 36” (minimum
24” flue riser required)
Cable restraint kit
Extra twin size basket for 14” pot
Stainless steel sides
Stainless steel divider
SHIPPING CRATE DIMENSIONS & WEIGHT
(Door-entry clearance when uncrated is 16.5” for
Model P16-PF45 and 20.5” for Model P20-PF65)
Model
Width Height Depth
Volume
Weight
P16-PF45
20.0
(508)
45.0
(1143)
42.5
(1080)
22.1 cu ft
(0.63 cu m)
210 lbs
(95 kg)
P20-PF65
23.0
(584)
41.0
(1041)
43.0
(1092)
23.5 cu ft
(0.66 cu m)
265 lbs
(120 kg)
GaS
Model
natural/Propane
BtU/Hour
P16-PF45
110,000
P20-PF65
150,000
