Questions? Call Toll Free at 1-800-737-2112
Copyright © 2011 MAT Engine Technologies, LLC
MAINTENANCE AND STORAGE OF THE MOWER
1. Disconnect the spark plug before performing maintenance.
2. Maintain the mower with care. Inspect the mower periodically. If the mower is not working properly or damaged, have
it repaired by a qualified service center.
3. Check for misalignment of moving parts, binding of moving parts, broken parts, mounting, and any other condition
that may affect its operation.
4. Check guards frequently and keep guards in place and in working order.
5. A guard or other part that is damaged should be properly repaired or replaced by a qualified service center.
6. Use only genuine Southland™ replacement parts and accessories. Use of any non-Southland™ parts or accessories
could lead to injury, damage to the unit, and void your warranty.
7. Maintain or replace safety and instruction labels as necessary. Do not remove safety or any labels from the mower
for any reason.
8. Do not change engine governor setting or overspeed the engine.
9. Do not remove or modify any parts. Removing or modifying parts could lead to injury, damage the mower and will
void the warranty.
10. Keep machine free of grass, leaves or other debris build-up. Clean up oil or fuel spills and remove any fuel-soaked
debris.
11. Allow engine to cool and empty the fuel tank before storing or transporting in vehicle. Use up remaining fuel in the
carburetor by starting the engine and letting it run until it stops.
12. Use extra caution when servicing mower blades. Disconnect spark plug wire before servicing blade or cleaning
underneath mower deck. Blades are sharp. To protect your hands, wrap the blade or wear gloves when handling.
13. Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors
or switches, furnaces, or where power tools are operated.
14. When not in use, store the mower in a clean, dry and well ventilated area.
Important Safety Information
Important Safety Information
(Continued)
• Save all instructions
4
