1
Setting 320CC Parameters
The 320 Card Cutter is capable of cutting 24 business cards from 12X18 sheet stock. To produce the
cleanest cuts, some adjustments may be required. Let’s start by defining the menu options.
When the 320CC is powered on and ready, the screen will display the current settings. Here’s a
breakdown of the selected settings in the image below.
0024 – this displays the number of cards the cutter will cut from a sheet of 12X18
SRA3 – although this is a European size definition, the 320CC has been set up to accept 12X18 sheets.
The actual measurements for this setting is 12.59 X 17.71, which is well within the capabilities of the
320CC.
3.50X2.00* - defines the size of the cut cards
in – the current measurement value.
Now, this can be changed according to your needs. There are 4 buttons above the display that let you
make changes to the current cut options.
Mode Changeover – allows the user to change the cut size of the business card. See appendix for all
available options
Set Parameter – allows the user to make changes to the parameters with is a subscribed mode.
Start (+) – starts the cut process. The + is used to change parameter settings.
Stop (-) – stops the cut process. The – is used to change parameter settings.
Summary of Contents for Graphic Whizard PT320 CC
