background image

 28 

 Southworth PalletPal Stack-n-Go / FPS3000-43NFO-21/27

PalletPal Stack-

N

-Go

Ordering Replacement Parts 

Southworth has carefully chosen the components in your lift to be the best available 
for the purpose. Replacement parts should be identical to the original equipment. 

Southworth will not be responsible for equipment failures resulting from the use of 

incorrect replacement parts or from unauthorized modifications of the machine.

 

Southworth will gladly supply you with replacement parts for your Southworth lift. With your 

order, please include the model number and the serial number of the lift. You can find these 

numbers on the name plate, which is located on the crossbar at the base of the cylinder(s). 
When you are ordering parts for a cylinder, also include the cylinder number. This is stamped 
on the base of the cylinder housing. 

To order replacement parts, please call the Parts Department.

Parts are shipped subject to the following terms: 

• FOB factory 

• Returns only with the approval of our parts department. 

• Payment net 30 days (except parts covered by warranty). 

• Freight collect (except parts covered by warranty). 

• The warranty for repair parts is 30 days from date of shipment.

Parts replaced under warranty are on a “charge-credit” basis. We will invoice you when we 
ship the replacement part, then credit you when you return the worn or damaged part, and we 
verify that it is covered by our warranty. Labor is not covered under warranty on parts orders. 

Parts Department 

Southworth Products Corp. 

Telephone 207) 878-0700  or (800) 743-1000 

FAX :  (207) 797-4734

repairparts@SouthworthProducts.com 

www.SouthworthProducts.com

Summary of Contents for PalletPal Stack-n-Go FPS3000-43 NAS






























Reviews:

Related manuals for PalletPal Stack-n-Go FPS3000-43 NAS