background image

7

Southworth Products

FPS3000-43NFO-21/27 Manual

10. 

Altering safety devices 

- Safety devices shall not be altered or disabled.

11. 

Modifications

 or alterations of the machine or the fabrication and attaching of frameworks 

or the mounting of attachments to the machine or the guarding system shall only be 

accomplished with prior written permission of the manufacturer.

12. 

Assistance to the operator

 - If an operator encounters any suspected malfunction or any 

hazard or potentially unsafe condition relating to capacity, intended use or safe operation 

the operator shall cease operation of the machine and request further instruction from the 

owner/user.

13. 

Problems or malfunctions

 - Any problem(s) or malfunction(s) that affect the safety of 

operations shall be repaired prior to the use of the machine.

2.  Safety

All personnel installing, operating, and maintaining this machine shall read and understand this 

manual. For questions or concerns contact the manufacturer. 
All operators of this machine must be trained, by their employer, in accordance with OSHA 

standard 1910.178 29QFR-7-1-06 before being permitted to operate this machine.

2.1    Safety Alert Symbols

A symbol that indicates a hazard. It is composed of an equilateral triangle surrounding an 

exclamation mark. The safety alert symbol is only used on hazard alerting signs. It is not used on 

safety notice and safety instructions signs.

A – 

For use with 

DANGER

 signal word; (safety white triangle, safety red exclamation mark, safety 

red background)

B – 

For use with 

WARNING

 signal word; (safety black triangle, safety orange exclamation mark)

C – 

For use with 

CAUTION

 signal word; (safety black triangle, safety yellow exclamation mark)

D  – 

For use with 

DANGER, WARNING, or CAUTION 

signal words; (

is a safety yellow triangle 

with a safety black border and safety black exclamation mark;

2.2    Signal Words

DANGER Indicates a hazardous situation that, if not avoided, will result 

in death or serious injury.
WARNING Indicates a hazardous situation that, if not avoided, could 

result in death or serious injury.
CAUTION Indicates a hazardous situation that, if not avoided, could 

result in minor or moderate injury.
NOTICE Indicates information considered important, but not hazard-

related  (e.g., messages relating to property damage).

A

B

C

D

Summary of Contents for Stack-N-Go FPS3000-43NFO-21





































Reviews: