23
Your product is equipped with an automatic oiling system.
The oiling system automatically delivers the proper amount
of oil to the bar and chain.
Set the product on any suitable surface with the tank cap (19)
facing upwards. Unscrew and remove the tank cap (19), then
add the lubricant into the tank. Use a proper funnel with a
filter to prevent debris entering the tank, and to avoid spilling
and overfill, and leave approximately 5mm of space to the
lower edge to allow the lubrication to expand (Fig. 6).
Check the oil level window (18) prior to start-up and regularly
during operation. Refill oil when the oil level is lower than ‘MIN’
marking (Fig. 7).
Wipe up spilled lubricant with a soft cloth and refit the tank
cap (19).
NOTE:
Always dispose of lubricant, used oil and objects
contaminated with them, in accordance with local
regulations.
Connection to the Power Supply
WARNING!
For your safety, it is required that the
plug attached to this product is always connected
to an extension cable. The extension cable must
15
11
Fig. 6
Fig. 7
