6
Do not plug ın or unplug this appliance with wet hands.
Following installation make sure that the power cable is not trapped
underneath the appliance.
Section 3. Operating the Appliance
3.1. Switching on the Appliance
Allow the appliance to stand for 4 hours after installation.
Plug in the appliance and switch on at the mains supply.
Set the thermostat control to the required setting as detailed in the
Temperature Control section (3.2.).
Leave the appliance for approximately 4 hours for the correct
temperature to be reached.
3.2. Temperature Control
The temperature selector knob is located at the front of the appliance.
Setting “0”: Unit Off
Setting “1”: Unit On – Warmest Temperature
Setting “3 to 5”: Normal Operation (adequate for most situations)
Setting “7”: Coldest Temperature
Important!
During high ambient temperatures e.g. on hot summer days, it may be
necessary to set the thermostat to the coldest setting (position 7). This may
cause the compressor to run continuously in order to maintain a low
temperature in the cabinet.
The appliance also has a Fast Freeze switch (orange) that can be turned on
when large quantities of fresh food have been added for freezing. When the
Fast Freeze function is operating, the switch will light up. Once the food is
frozen, turn the Fast Freeze switch off.
3.3. Storing & Freezing Food in the Freezer
This appliance is a four star freezer and is suitable for the long-term storage of
frozen food items. It can also be used for freezing and storing fresh food items.
You should always follow the storage guidelines printed on each food producers
packaging, however the information provided on the inner face of the access lid
(see Description of Appliance) can be used as a general guide for the maximum
storage life of frozen items.
