GB
1. Guide
Bar
2. Saw
chain
3.
Saw Chain Adjustment Screw
4.
Spark Arrester Screen
5.
Chain Brake Lever / Hand
Guard
6.
Front Handle
7.
Starter Handle
8. Spark
Plug
9. Air Cleaner Cover
10. Stop Switch
11. Safety Trigger
12. Oil Tank cap
13. Starter Cover
14. Fuel Tank Cap
15. Rear Handle / Boot Loop
16. Throttle Latch
17. Chock Lever
18. Bar Retaining Nuts
19. Throttle Trigger
20. Chain Catcher
21. Muffler Shield / Clutch Cover
22. SPIKED BUMER
23. Guide Bar Cover
GENERAL INFORMATION
3
2
10
6
7
17
11
12
13
14
1
9
16
15
19
8
21
4
20
18
2 LOW KICKBACK SAW CHAIN
helps significantly
reduce kickback, or the intensity of kickback, due to
specially designed depth gauges and guard links.
4 SPARK ARRESTER SCREEN
retains carbon and
other flammable particles over 0.023 inches (0.6mm)
in size from engine exhaust flow. Compliance with
local, state and federal laws and/or regulations gov-
erning the use of a spark arrester screen is the user’s
responsibility. See Safety Precautions for additional
information.
5 CHAIN BRAKE LEVER / HAND GUARD
protects the
operator’s left hand in the event it slips off the front
handle while saw is running.
5 CHAIN BRAKE
is a safety feature designed to
reduce the possibility of injury due to kickback by
stopping a moving saw chain in milliseconds. It is
activated by the CHAIN BRAKE lever.
10 STOP SWITCH
immediately stops the engine when
tripped. Stop switch must be pushed to ON position
to start or restart engine.
11
SAFETY TRIGGER
prevents accidental acceleration
of the engine. Throttle trigger (19) cannot be
squeezed unless the safety latch is depressed.
20 CHAIN CATCHER
reduces the danger of injury in
the event saw chain breaks or derails during
operation. The chain catcher is designed to intercept
a whipping chain.
21 MUFFLER SHIELD / CLUTCH COVER
helps pre-
vent hands and combustible materials from making
contact with a hot muffler.
22 SPIKE BUMPER
The spiked bumper is used for
your personal safety and ease of cutting. Spiked
bumper will increase your stability while performing
vertical cutting.
NOTE:
Study your saw and be familiar with its parts.
SAFETY FEATURES
Numbers preceding the descriptions correspond with the numbers on preceding page to help you locate the safety
feature.
22
23
5
4
Anleitung SCS 38-45 GB 12.11.2004 8:03 Uhr Seite 4
