9
Step 1:
Tilt the appliance slightly towards the
rear and prop it securely. Unscrew the level
adjuster and the foot.
Unscrew the bottom hinge screws.
Support/hold the door so that it does not fall off.
Step 2:
Remove two plastic caps in the top
cover. Unscrew the four screws that fix the top
cover. Remove the top cover.
Step 3:
Remove the door.
Step 4:
remove the plastic caps on the top of
door and fit to the opposite side. Remove the
plastic plug in bottom of door and fit to opposite
side.
Step 5:
Unscrew the bottom hinge nut and
remove hinge pin from the hinge plate. Turn the
hinge plate over and refit the hinge pin and
secure with nut.
Step 6:
Refit the hinge plate to the opposite side of the
cabinet and secure with three screws. Refit the
level adjuster and foot.
