9
4.5. Reversing the Door
The door opening can be reversed from “right hand hinged” to “left hand hinged”
or vice versa.
Warning!
When reversing the door, the appliance must not be connected to the
mains. Remove the plug from the mains beforehand.
Remove the upper hinge cover and the two hinge retaining screws.
Remove the upper hinge and lift the door off the lower hinge.
Remove the lower hinge retaining screws and remove the hinge.
Transfer the adjustable foot to the opposite side.
Remove and hole blanking plate from the top surface of the appliance
and transfer it to the opposite side.
Before re-fitting the lower hinge plate to the opposite side, unscrew the
hinge pin from the hinge plate, turn the hinge plate over and re-fit the
hinge pin. Now secure the lower hinge plate to the opposite side.
Place the door onto the lower hinge and secure the upper hinge in
position. Ensure that the door is level before tightening the hinge screws.
Re-fit the upper hinge cover.
Now ensure that the door opens freely and seals tightly when closed.
4.6. What to do if something goes wrong
Before contacting our service help line, check the following points:
There is no power to the appliance:
Check there is not a power cut
Check there is power to the electric socket/appliance
Check the fuse in the plug (Must be 13 amp)
Check that the Temperature Control is set to “Min” or above
