BIOS Setup
31
PCI IDE IRQ Map To
Primary IDE INT#
Secondary IDE INT#
Internal PCI/IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE HDD Block Mode
Onboard FDC Control
Select PCI-AUTO, ISA, or assign a PCI SLOT number
(depending on which slot the PCI IDE is inserted).
The default setting is PCI-AUTO. If PCI-AUTO does
not work, then assign an individual PCI SLOT
number.
Choose INTA#, INTB#,
default setting is INTA#.
Choose INTA#, INTB#,
default setting is INTB#.
Choose Both (default),
Disabled.
INTC#, or INTD#. The
INTC#, or INTD#. The
Primary, Secondary, or
Both: Turns on the Primary and Secondary
IDE function.
Primary Turns on the Primary IDE function.
Secondary Turns on the
Secondary
IDE function.
Disabled Turns off the Primary and
Secondary
IDE function.
Choose Auto (default) or mode 0-4. Mode O is the
slowest speed, and HDD mode 4 is the fastest speed.
For better performance and stability, we suggest you
use the Auto setting to set the HDD control timing,
Choose Enabled (default) or Disabled. Enabled
invokes multi-sector transfer instead of one sector
per transfer. Not all HDDs support this function,
Enabled: Use the on-board floppy controller
(default).
Disabled: Turn off the on-board floppy controller.
Summary of Contents for 5SM2
Page 1: ...j p l Pentium...
