Introduction
5
Unpacking the Mainboard
The mainboard package contains:
●
The SiS 551X / P54C Mainboard
●
This User's Guide
Note: Do not unpack the mainboard until you are ready to install it.
Follow the precautions below while unpacking the mainboard,
1.
2.
3.
Before handling the mainboard, ground yourself by grasping an unpainted
portion of the system's metal chassis.
Remove the mainboard from its anti-static packaging and place it on a grounded
surface, component side up.
Check the mainboard for damage. If any chip appears loose, press carefully to
seat it firmly in its socket.
Do not apply power if the rnainboard appears damaged. If there is damage to the
board contact your dealer immediately.
Electrostatic Discharge Precautions
Make sure you ground yourself before handling the mainboard or other system
components. Electrostatic discharge can easily darnage the components. Note that
you must take special precaution when handling the mainboard in dry or air-
conditioned environments.
Take these precautions to protect your equipment from electrostatic discharge:
●
Do not remove the anti-static packaging until you are ready to install the
rnainboard and other system components.
●
Ground yourself before removing any system component from its protective
anti-static packaging. To ground yourself grasp the expansion slot covers or
other unpainted portions of the computer chassis.
●
Frequently ground yourself while working, or use a grounding strap.
●
Handle the rnainboard by the edges and avoid touching its components.
Summary of Contents for 5SM2
Page 1: ...j p l Pentium...
