4
Drivers Installation Guide
IDE BUS Master Installation Guide
MS-DOS/WINDOW/WFW
1)
You should install CD-ROM in secondary channel in Windows
(WFW).
2)
Change the current directory to a: or b:.
3)
Under DOS command line prompt, run the SETUP directly.
After entering the setup utility, just follow the instructions of the setup.
WINDOWS NT3.5
1)
From the Program Manager, double click on ÒWindows NT SetupÓ
in the Main group.
2)
Select ÒOptions/Add/Remove SCSI Adapters...Ó.
3)
Click on Add.
4)
The ÒSelect SCSI Adapter OptionÓ dialog will appear; select ÒOther
(Requires a disk from a hardware manufacturer)Ó from the
ÒAdapter:Ó list box.
5)
Next, the ÒInsert DisketteÓ dialog box will appear; insert the Triones
PIIX/PIIX3 Bus Master EIDE/ATAPI Driver disk into Drive A: and
type in Òa:\winnt35Ó and <Return>.
6)
Next, the ÒSelect OEM OptionÓ dialog box will appear; select
ÒPIIX/PIIX3 Bus Master EIDE/ATAPIÓ and click ÒOKÓ.
7)
Next, the ÒSelect SCSI Adapter OptionÓ dialog box will appear;
click on the ÒInstallÓ button in the dialog box. If installation is
successful, the ÒSCSI Adapter SetupÓ dialog box will reappear, and
ÒPIIX/PIIX3 Bus Master EIDE/ATAPIÓ will be listed. That means
the driver is installed.
8)
Reboot your system to load the driver.
