22
BIOS Setup
CPU L2 Cache
ECC Checking
Choose Enabled (default) for checking CPU L2
Cache ECC Function or Disabled to disable this
function.
Quick Power
On Self Test
Enabled provides a fast POST at boot-up .
Boot Sequence
Choose the boot device sequence as your need. For
example, ÒA, C, SCSIÓ means BIOS will look for an
operating system first from drive A, drive C, then
SCSI device. Options of this function are:
A, C, SCSI
C, A, SCSI
C, CDROM, A
CDROM, C, A
D, A, SCSI
E, A, SCSI
F, A, SCSI
SCSI, A, C
SCSI, C, A
C only
LS/ZIP, C.
Swap Floppy
Drive
Enabled changes the sequence of the A: and B:
drives. (The Default setting is Disabled.)
Boot Up Num
Lock Status
Choose On or Off. On puts numeric keypad in Num
Lock mode at boot-up. Off puts this keypad in arrow
key mode at boot-up.
Typematic Rate
Setting
Enable this option to adjust the keystroke repeat rate.
Typematic Rate
(Chars/Sec)
Choose the rate a character keeps repeating.
Typematic
Delay (Msec)
Choose how long after you press a key that a
character begins repeating.