BIOS Setup
35
IDE Primary Master
UDMA/
IDE Primary Slave
UDMA/
IDE Secondary Master
UDMA/
IDE Secondary Slave
UDMA
Choose
Auto
(default) or
Disabled
.
Auto Ð
Supports Ultra DMA mode.
On-chip Primary PCI
IDE/
On-chip Secondary PCI
IDE
Enabled ÐUse the on-board IDE
(default)
Disabled Ð Turn off the on-board IDE
USB Keyboard Support
Choose
Disabled
(default) or
Enabled
.
You need to use the regular keyboard to
get in the BIOS Setup to enable this
function before using the USB keyboard.
Init AGP Display First
If you use two VGA cards (one PCI/one
AGP) on your system, set this item to
Enabled will use the AGP VGA card to
boot up the system. If Disabled (default)
is chosen, the system will bootup using
the PCI VGA card.
POWER On Function
If you enable the PS/2 keyboard wake up
function by setting JP10 to 1Ð2, you can
set the appropriate action through this
item. Refer to the table below for
details:
Setting
Explanation
BUTTON ONLY
(default)
This setting disables the wake-up function.
Password
If you choose this option, you will have to set your
password in the ÒKB Power On PasswordÓ item below.
You will be able to wake up the system by entering the
password or by pressing the power button.
Hot Key
If you choose this option, you will have to set the key
combination that will wake up the system in the ÒHot key
Power OnÓ item below.
Note: Please set JP10 to 2Ð3 if you choose ÒBUTTON ONLY.Ó
