22
BIOS Setup
Quick Power
On Self Test
Enabled provides a fast POST at boot-up .
Boot Sequence
Choose the boot device sequence as your need. For
example, ÒA, C, SCSIÓ means that BIOS will look
for an operating system first from drive A, drive C,
then SCSI device. Options of this function are:
A, C, SCSI;
C,A, SCSI;
C, CDROM, A;
CDROM, C, A;
D, A, SCSI;
E, A, SCSI;
F, A, SCSI;
SCSI, A, C;
SCSI, C, A;
C only;
LS/ZIP, C.
Swap Floppy
Drive
Enabled changes the sequence of the A: and B:
drives. (The Default setting is Disabled.)
Boot Up Num
Lock Status
Choose On or Off. On puts numeric keypad in Num
Lock mode at boot-up. Off puts this keypad in arrow
key mode at boot-up.
Gate A20
Option
Choose Fast (default) or Normal. Fast allows RAM
accesses above 1MB using the fast gate A20 line.
Typematic Rate
Setting
Enable this option to adjust the keystroke repeat rate.
Typematic Rate
(Chars/Sec)
Choose the rate a character keeps repeating.
Typematic
Delay (Msec)
Choose how long after you press a key that a
character begins repeating.
