SOYO AVRO3002 Ethernet Router Manual
19
AVRO 3002 provides extensive firewall protection by restricting
connection parameters to limit the risk of hacker attack, and defending
against a wide array of common attacks. When firewall is enabled,
extra checking will be performed for each packets passing through the
device, the performance of the device will be greatly affected. To
enable the firewall feature, select <Enable> from firewall page:
5.5.1. Access Control
Access Control allows users to block PCs on your network from
gaining access to the Internet. The user can block PCs based on IP
and MAC address. When firewall is enabled, Access Control will be
enabled automatically. User can disable filtering feature manually.
When Access Control is enabled, all the packets will be allowed by
default, user can use <Normal Filtering Table> and <MAC Filtering
Table> to filter out un-allowed traffic.
Normal Filtering Table
User can press <Add PC> to edit packet filtering rules.
When user selects <Add PC>, the following <Access Control Add
PC> page will show up:
