SOYO G1681 Analog Telephone Adapter User Guide
-11-
Network Settings
iptype
:
Set how G1681 ATA gets relevant network parameters by selecting
corresponding item from drop down list.
static ip:
Select this item to authorize users t o set IP address, subnet
mask and router IP address of the ATA manually.
dhcp:
Select this item to enable DHCP mode. With this system, router
automatically assigns all the required network parameters to any device
connected to it when the device log on. The ATA’s LAN parameters will
automatically be configured as soon as it is connected to the LAN or router
and powered up.
pppoe:
Select this item to enable PPPoE protocol. Some DSL providers
require PPPoE setup. For more information, please contact your DSL
provider.
modem:
Not supported by this model.
ppp id:
With
pppoe
or
modem
selected in
iptype
drop down list, please enter
the user name here.
ppp pin:
With
pppoe
or
modem
selected in
iptype
drop down list, please enter
the password here.
local ip:
With
static ip
selected in
iptype
drop down list, please enter IP
address of the ATA here.
subnet mask:
With static
ip
selected in iptype drop down list, please enter
subnet mask of the ATA here.
router ip:
With
static ip
selected in
iptype
drop down list, please enter router
IP address of the ATA here.
dns:
With
static ip
selected in
iptype
drop down list, please enter IP address
of DNS server here.
dns 2:
With
static ip
selected in
iptype
drop down list, please enter IP address
of backup DNS server here.
