SOYO G1681 Analog Telephone Adapter User Guide
-12-
mac:
MAC address is the physical address supplied by the Ethernet NIC.
SOYO ATA is shipped from the factory with a unique algorism MAC address
printed on the back of the adapter.
Audio Settings
codec1:
Set the 1
st
priority of the audio compression algorithm. The options
are g729, g7231, g711u, g711a, iLBC, and gsm.
codec2:
Set the 2
nd
priority of the audio compression algorithm. The options
are g729, g7231, g711u, g711a, iLBC, and gsm.
codec3:
Set the 3
rd
priority of the audio compression algorithm. The options
are g729, g7231, g711u, g711a, iLBC, and gsm.
codec4:
Set the 4
th
priority of the audio compression algorithm. The options
are g729, g7231, g711u, g711a, iLBC, and gsm.
codec5:
Set the 5
th
priority of the audio compression algorithm. The options
are g729, g7231, g711u, g711a, iLBC, and gsm.
codec6:
Set the 6
th
priority of the audio compression algorithm. The options
are g729, g7231, g711u, g711a, iLBC, and gsm.
vad:
Enable/disable VAD (Voice Activity Detection).
agc:
Enable/disable AGC (Automatic Gain Control).
aec:
Enable/disable AEC (Automatic Echo Cancellation).
audio frame:
Set audio frames in RTP package. Minimum is 1 and maximum
is 8.
g.723.1 high rate:
Enable/disable g.723.1 high rate. G.723.1 high rate is
6.3kbps, low rate is 5.3kbps.
ilbc payload :
Set the payload type of RTP package when ILBC codec is
selected to DTMF delay. The value range is 96-255.
