2
Introduction
Unpacking the Mainboard
The mainboard package contains:
¥ The EQ82C661X Mainboard
¥ This UserÕs Guide
Note:
Do not unpack the mainboard until you are ready to install it.
Follow the precautions below while unpacking the mainboard.
1.
Before handling the mainboard, ground yourself by grasping an
unpainted portion of the systemÕs metal chassis.
2.
Remove the mainboard from its anti-static packaging and place it on
a grounded surface, component side up.
3.
Check the mainboard for damage. If any chip appears loose, press
carefully to seat it firmly in its socket.
Do not apply power if the mainboard appears damaged. If there is
damage to the board contact your dealer immediately.
Electrostatic Discharge Precautions
Make sure you ground yourself before handling the mainboard or other
system components. Electrostatic discharge can easily damage the
components. Note that you must take special precaution when handling
the mainboard in dry or air-conditioned environments.
Take these precautions to protect your equipment from electrostatic
discharge:
¥ Do not remove the anti-static packaging until you are ready to install
the mainboard and other system components.
¥ Ground yourself before removing any system component from its
protective anti-static packaging. To ground yourself grasp the
expansion slot covers or other unpainted portions of the computer
chassis.
¥ Frequently ground yourself while working, or use a grounding strap.
¥ Handle the mainboard by the edges and avoid touching its
components.
